
Non-Compliant Balloon Catheter
” The superior high force for the demanding Interventionalist ”
Low profile, high pressure angioplasty catheters designed to be used in dilating the unyielding fibrocalcified lesions with a high pressure application providing controlled expansion, as well.
The use of Europa Ultra NCTM for post-dilatation of DES/or BMS optimizes stent-to-wall apposition, reduces edge effects and minimizes vessel wall damage post stenting, even in stiff fibrotic lesions
Improved trackability
- Non-Compliant design, resisting deformation when subjected to pressure
- Controlled minimal balloon growth (5%) between NP & RBP for flat compliance
- High pressure catheter (RBP up to 20 atm)
- Optimal accuracy is ensured even under high dilatation forces while maintaining dimensional stability
- Ultra-low 0.016’’ tip profile
- Soft, short and tapered atraumatic tip
- Rontis’ proprietary balloon material blend ensures decreased wall thickness
- Rontis’ proprietary hydrophilic coating, HiFlow for enhanced lubricity
- Homogeneous balloon expansion
- Tri-folding balloon technology
TECHNICAL DATA
Europa Ultra NCTM Non-Compliant Coronary Balloon Catheter
Mode of exchange: | Rx | |
Baloon material / characteristic: | modified polyamide / non-compliant | |
Guiding Catheter compatibility (min): | 5F | |
Usable Catheter length: | 140 cm | |
Radiopaque markers: | 2, Pt-Ir | |
Distal shaft: | 2.4F (Ø 2.00 mm) 2.5F (Ø 2.25 – 3.50 mm) 2.9F (Ø 4.00 – 5.00 mm) |
|
Hypotube: | 2.0F | |
Guidewire compatibility (max): | 0.014” | |
Nomimal pressure: | 10 bar | |
Rated Burst Pressure: | 18 – 20 bar | |
Coating: | Hydrophilic, HiFlow | |
Total shelf life: | 4 years | |
User trainings are performed upon request. Due to confidentiality, for further user information/videos please contact us at endovascular@rontis.com.
